Took delivery of my 6500CS Rocket, bought from Ebay, this morning. Initial impressions are that the reel is pretty much as described, so not in perfect condition, but I was glad to see that the CT conversion used a proper replacement bar, rather than the other method I’ve often seen, where the level wind bar is removed and the holes sealed, but the top bar is left in place. That negates one of the benefits of a CT cage, which is to be able to get a better grip on the spool for casting, due to the open cage.
Partially dismantled the reel, and realised that the bearings are stuck in the spool, so popped out to buy some 3-in-1, and applied it, to make them easier to remove once I get home. also bought some lighter fluid to soak the bearings from all my reels after the next fishing trip.
Also noticed that the instant anti-reverse is not instant any more, and when you spin the handle fast and hold on to it, the gears slip round inside the side plate. So will have a look inside and see what needs to be replaced.
Leave a Reply